To go to USA region/ Website click on flag

Delta, US Optics, Tangent Theta and Tactical Gear

Rifle Bipods

Showing all 8 results

  • ARCA CLAMP

    R1,250.00

    With the growing popularity of ARCA technology being used in long range shooting, we saw a need to develop a system that would allow you make use of the multiple benefits of ARCA rails. We also wanted to offer shooters the ability to use the clamp with other hardware, therefore an option to add a picitiny rail that clips into the clamp is also provided.

     

    APW Clamp fits the Atlas Bipods using factory hardware (excluding the 2-screw bipods. QD and NC only).

    Compare
  • Atlas Bipod BT65-LW17 Gen. 2 CAL

    R6,850.00
    The CAL (Cant And Loc) Atlas Bipods were developed for shooters that do not desire the Panning feature.
    The BT65-LW17 mounts directly to any 1913 style Picatinny rail via the included ADM-170-S Lever. It is comprised of 6061-T6 aluminum that is Mil-Spec Type III hard coat anodized and have heat treated stainless steel components. Available in black only. We chose to support a legend in the shooting sports by using the original KMW “Pod-Loc™.” Read how to adjust the Pod-Loc™ lever below.
    Height Range: 5.1 – 9.4″ (6.6” at 90°)
    Preloaded Cant: 45 degrees
    Position Button 0.5″ diameter
    5 leg positions: 0, 45, 90, 135 & 180 degrees
    Non-Rotating Legs: outer leg does not rotate around inner leg
    Larger, stronger inner legs
    Weight: 14.57 ounces
    Footprint: 9–12.5″
    Compare
  • Atlas BT10-LW17 V8 Bipod (Quick Release)

    R6,365.00
    • BT10-Mounts directly to any 1913 style Picatinny rail via a low profile two screw clamp assembly.
    • Height Range approximately 4.75 – 9.0″.
    • 15 degrees +/- of preloaded Pan
    • 15 degrees +/- of preloaded Cant
    • Leg positions are; stowed back, 45 degrees angled back, 90 degrees straight down, 45 degrees forward and stowed forward.
    • Weight 11.0 ounces.
    • Available in black only.
    • Made in America

     

    Below is a comment from a customer who purchased a BT10

    “I bought an Atlas bipod with the 2 screw mount (BT10), that I thought I wanted, but after seeing the one with the quick release mount (BT10-LW17) I like it much better. Do you have an exchange policy that I can upgrade to the quick release mount?”

    As customers contact us quite often about this we decided to post this up to increase awareness, here is the answer;

    If you bought a BT10 from us and it is still in the original packaging and you want to upgrade to a BT10-LW17, we will give full value credit for the BT10 (less the S&H charges) towards the cost of the BT10-LW17.

    If you have opened the original packaging, we can convert your BT10 into a BT10-NC for 60.00, add a ADM 170-S Lever Mount for 60.00. Doing both will cover the conversion of your BT10 into a BT10-LW17 for a total of 120.00, delivered back to you.

    Customers can also purchase our BT43 allowing them to enjoy the functionality of a lever while keeping their BT10. Customers who are looking to exchange their unit please see our Exchange policy. B&T Ind. encourages all of our customers to please consider their purchase carefully.

     

    • Standard two screw clamp on style
    • Construction from T6061 Aluminum, Hard Anodized black
    • Stainless steel springs and fasteners
    • UHMW components used for smooth tracking
    • 15 degrees +/- of preloaded Pan
    • 15 degrees +/- of preloaded Cant
    • Preload on Pan and Cant can be tightened by means of the knurled knob
    • Picatinny Rail Mount interface by either standard machine screw fastener based clamp or optional ARMS 17S lever mount.
    • Non orientated leg positioning use either hand to move leg into any of the four leg positions
    • Leg positions are; stowed back, 90 degrees straight down, 45 degrees forward and stowed forward.
    • All 4 leg positions are solid allowing the shooter to load the bipod at the 45 and 90 degree positions.
    • Non orientated leg length adjustment, Outer leg slides on the Inner leg locating on any of five positions ¾” apart and can be done by either hand.
    • Optional 3” leg extensions to increase height available.
    • Standard soft durable Rubber feet that are suitable for many surfaces.
    • Optional interchangeable Ski and Multi Spiked style feet can be swapped in the field with the press of a ball plunger with a bullet tip.
    • Optional mounting systems available for Accuracy International and Sako rifles.
    • Estimated range of elevation on the BT10 is 5-9” from the surface up to the rail.
    • Made in America
    Compare
  • atlas

    Atlas BT46-LW17 PSR Bipod (Quick Release)

    R7,299.00
    • BT10-Mounts directly to any 1913 style Picatinny rail via a low profile two screw clamp assembly.
    • Height Range approximately 4.75 – 9.0″.
    • 15 degrees +/- of preloaded Pan
    • 15 degrees +/- of preloaded Cant
    • Leg positions are; stowed back, 45 degrees angled back, 90 degrees straight down, 45 degrees forward and stowed forward.
    • Weight 11.0 ounces.
    • Available in black only.
    • Made in America

     

    Below is a comment from a customer who purchased a BT10

    “I bought an Atlas bipod with the 2 screw mount (BT10), that I thought I wanted, but after seeing the one with the quick release mount (BT10-LW17) I like it much better. Do you have an exchange policy that I can upgrade to the quick release mount?”

    As customers contact us quite often about this we decided to post this up to increase awareness, here is the answer;

    If you bought a BT10 from us and it is still in the original packaging and you want to upgrade to a BT10-LW17, we will give full value credit for the BT10 (less the S&H charges) towards the cost of the BT10-LW17.

    If you have opened the original packaging, we can convert your BT10 into a BT10-NC for 60.00, add a ADM 170-S Lever Mount for 60.00. Doing both will cover the conversion of your BT10 into a BT10-LW17 for a total of 120.00, delivered back to you.

    Customers can also purchase our BT43 allowing them to enjoy the functionality of a lever while keeping their BT10. Customers who are looking to exchange their unit please see our Exchange policy. B&T Ind. encourages all of our customers to please consider their purchase carefully.

     

    • Standard two screw clamp on style
    • Construction from T6061 Aluminum, Hard Anodized black
    • Stainless steel springs and fasteners
    • UHMW components used for smooth tracking
    • 15 degrees +/- of preloaded Pan
    • 15 degrees +/- of preloaded Cant
    • Preload on Pan and Cant can be tightened by means of the knurled knob
    • Picatinny Rail Mount interface by either standard machine screw fastener based clamp or optional ARMS 17S lever mount.
    • Non orientated leg positioning use either hand to move leg into any of the four leg positions
    • Leg positions are; stowed back, 90 degrees straight down, 45 degrees forward and stowed forward.
    • All 4 leg positions are solid allowing the shooter to load the bipod at the 45 and 90 degree positions.
    • Non orientated leg length adjustment, Outer leg slides on the Inner leg locating on any of five positions ¾” apart and can be done by either hand.
    • Optional 3” leg extensions to increase height available.
    • Standard soft durable Rubber feet that are suitable for many surfaces.
    • Optional interchangeable Ski and Multi Spiked style feet can be swapped in the field with the press of a ball plunger with a bullet tip.
    • Optional mounting systems available for Accuracy International and Sako rifles.
    • Estimated range of elevation on the BT10 is 5-9” from the surface up to the rail.
    • Made in America
    Compare
  • TAC VECTOR SWIVEL BIPOD 6-9″

    R1,200.00
    Compare
  • UTG Heavy Duty Recon 360 Bipod, Cent Ht: 5.59″-7.0″ – Please confirm stock before ordering TL-BP02

    R1,990.00
    Compare
  • UTG Heavy Duty Recon 360 Bipod, Cent Ht: 6.69″-9.12″ TL-BP01

    R1,990.00
    Unique Tension Adjustable 360-degree Panning with Multi-axial Tilting Base to Achieve Virtually Any Desired Bipod Adjustment
    Versatile Bidirectional Bipod Folding with 5 Posi-lock Positions for Convenient Use on Different Firearms at Varying Angles
    Metal Construction with Square Steel Cross Bolt for Superior Hold on any Picatinny Rail
    Innovative Offset Picatinny Mounting Deck Frees up Handguard Real Estate
    Fully Adjustable Legs with 5 Extendable Lengths Lockable via Thumb Wheel for Enhanced Stability at Multiple Heights
    Non-slip Rubberized Foot Pads for any Terrain or Surface
    Complete with Swivel Stud Kit for Swivel Stud Mounting
    Center Height Adjustable From 6.7″ to 9.1″
    Compare
  • Warrior Claw

    R1,000.00
    Compare
×

Powered by WhatsApp Chat

× How can we help you?